f/I-f/f Converter – 2255


f/I-f/f converter

Model: 2255
Make: PR Electronics
Origin: Denmark

  • Frequency to analog & frequency to frequency conversions
  • Programmable f/I converter
  • Programmable decimal divider / decimal multiplier
  • Programmable frequency generator
  • Relay output as option
  • Supply voltage 24 VDC

 

 

 

$464.00$488.00

Email
Compare

Advanced features

  • The user programmable version has a multifunction user interface consisting of three pushbuttons and a 3-digit LED displays.

Application

  • Typical signalling devices may be pulse generators, for instance flow meters, tacho-generators or inductive sensors.
  • The f/I function is used for frequency to current / voltage conversion.
  • The f/f function is used for division or multiplication of pulses and as a buffer for fast pulse trains.
  • A frequency generator function e.g. used as a time base or a clock generator.

Technical characteristics

  • 3 front LEDs, indicating f.in active input (not NPN), Dig.out (NPN or relay 1) active output and a NAMUR input error signal.
  • Analog current output can be configured within 0…20 mA range.
  • Voltage output range is selectable between 0…10 VDC by use of internal jumpers.
  • Feature include input filter, contact filter and an auxiliary supply for sensor such as NAMUR and S0.
  • Mounting for a standard 11-pole socket which can be adapted for DIN rail or plate use with PR’s 7023 adaptor and 7024 mounting keying.
Weight 0.125 kg
Dimensions 80.5 × 35.5 × 84.5 mm
Product Version:

2255B1: Analog+NPN Output, 2255B2: Analog+2xRelay Outputs

Environmental Conditions

Operating temperature -20°C to +60°C
Calibration temperature 20…28°C
Relative humidity < 95% RH (non-cond.)
Protection degree IP50

Mechanical specifications

Dimensions (HxWxD) 80.5 x 35.5 x 84.5 mm (D is without pins)
Weight approx. 125 g

Common specifications

Supply

Supply voltage 19.2…28.8 VDC
Internal power dissipation 2.4 W

Isolation voltage

Isolation voltage, test / working 1.4 kVAC / 150 VAC

Response time

Response time (programmable) 60 ms to 999 s + period time
Warm-up time 1 min.
Signal / noise ratio Min. 60 dB
Accuracy Better than 0.1% of selected range
Signal dynamics, output 16 bit
Effect of supply voltage change < 0.005% of span / VDC
Temperature coefficient < ±0.01% of span / °C
Linearity error < 0.1% of span
S0 supply 15 VDC / 25 mA
Special supply (programmable) 5…15 VDC / 30 mA (acc. to order)
EMC immunity influence < ±0.5%

Input specifications

Common input specifications

Max. offset 90% of selec. max. value
Measurement range 0…20 kHz
Min. measurement range 0.001 Hz
Low cut-off frequency 0.001 Hz
Min. pulse length 25 μs
Input types NAMUR acc. to DIN 19234 Tacho
NPN / PNP
TTL
S0 acc. to DIN 43864

Output specifications

Current output

Signal range 0…20 mA
Min. signal range 5 mA
Load (@ current output) ≤ 600 Ω
Load stability ≤ 0.01% of span / 100 Ω

Common output specifications

Updating time 20 ms
Voltage output through internal shunt See manual for details
Max. current, NPN output 130 mA
Max. voltage, NPN output 28 VDC
Frequency output range 0…1000 Hz
Min. pulse length 500 μs
Max. pulse length 999 ms
Max. duty cycle 50%
Frequency generator: Pulse length f < 50 Hz Min. 10 ms Max. 999 s
Pulse length f ≥ 50 Hz 50% duty cycle
*of span = of the presently selected range

Observed authority requirements

EMC 2014/30/EU
LVD 2014/35/EU

Approvals

EAC TR-CU 020/2011

You may also like…

  • ,

    4222 I/F Converter

    $364.00 Add to cart
  • Socket 7023

    $22.00 Add to cart