NT 100-DP-DP

Availablity: Available on backorder

Gateway PROFIBUS DP Master to PROFIBUS DP Slave
High-End Gateway for demanding conversions

NT 100-DP-DP

Make: Hilscher
Origin: Germany
Product Status: Active

Integrates a subordinate PROFIBUS network trunk in PROFIBUS
Master for up to 125 PROFIBUS slaves
Shortest I/O data conversion time lower than 10 ms
Device replacement in seconds via memory card based loading
Loadable firmware for flexible use of other conversions
With USB diagnostic and configuration port


Available on backorder


netTAP 100 is the protocol converter for sophisticated conversions and supports 2-port Real-Time Ethernet to serial, Fieldbus to Fieldbus, Real-Time Ethernet to Fieldbus and Real-Time Ethernet to Ethernet conversions. It supports slave and master functionality in any combination. Master functionality is unrestricted when licensed.

A memory card slot allows the user to save firmware and configuration data on a removable card. In case of failure all that is necessary to bring the plant back on line within seconds is to move the memory card from the old netTAP 100 onto a spare unit.

Apart from standard protocols, netTAP 100 supports the creation of serial protocols with the Lua-based scripting language netSCRIPT. A full featured development environment is included within the delivery. It allows the comfortable and rapid programming of any proprietary serial protocol as well as the I/O data pre-processing during the conversion into the other field protocol.

Ordering information:

NT 100-DP-DP 1718.180 Gateway PROFIBUS DP Master to PROFIBUS DP Slave
NXLIC-MASTER 8211.000 Master license


Weight 0.5 kg
Dimensions 25 × 15 × 17 mm

ProductProduct nameNT 100-DP-DPPart number1718.180Brief descriptionGateway PROFIBUS DP to PROFIBUS DPCommunication controllernetXnetX 100Integrated MemoryRAM8 MB SDRAMFLASH4 MB serial FlashMemory cardType and sizeSD or MMC card, max. 2 GBytePower supplySupply voltage24 V DC ± 6 VMaximum Current at 24 V (typically)130 mATypical power consumption3,2 WConnectorMini-COMBICON, 2-pinReverse voltage protectionyesRequirement to the power supplyFor UL conform usage: Device shall be supplied by an isolated voltage sourceCommunication interface 1Communication standardPROFIBUS-DPInterface typeRS-485, optically isolatedConnectorD-Sub, female, 9-pinCommunication interface 2Communication standardPROFIBUS-DPInterface typeRS-485, optically isolatedConnectorD-Sub, female, 9-pinDiagnostic interfaceTypeUSBConnectorMini-USB, 5-pinDisplaysLED displaysSYS System statusAPL Application statusCOM Communication statusLINK Link, ACT ActivityOperating elementsNetwork addressNetwork address, 2 rotary switchesPermitted ambient conditionsAmbient temperature (operation)0 … + 60 °CHumidityno condensation permittedPollution degreeFor UL-compliant usage: Device must be used in a pollution degree 2 environmentDeviceDimensions (L x W x H)100 x 52 x 70 mm (without connector)Weightappr. 150 gDegree of protectionIP 20Mountingon DIN rail EN 60715ConformityRoHSYesUL certificationULThe device is UL 508 certifiedUL fileUL-File No E334100Conformance with EMC directivesCE signYesEmissionCISPR 11 Class AImmunityEN 61131-2:2003