Dark Light
NT 100-CO-CC Hilscher
, , , ,

NT 100-CO-CC Hilscher

Hilscher
Availability:

Available on backorder

Add to Wishlist
Compare

Make: Hilscher | Origin: Germany | Condition: New

Gateway CANopen to CC-Link Slave | High-end gateway for demanding conversions

✔ Integrates a subordinate CANopen network trunk in CC-Link
✔ Master for up to 126 CANopen Nodes
✔ Shortest I/O data conversion period of less than 10 ms
✔ Device exchange in seconds by loading via memory card
✔ Loadable firmware for the flexible use of further conversions
✔ With diagnosis and configuration interface via USB

€826.00

Available on backorder

Request Quote

NT 100-CO-CC CANopen to CC-Link Slave supports the following protocols:

  • CANopen Slave
  • CC-Link Slave
  • CANopen Master

netTAP 100 connects to communication networks and acts as a Gateway for sophisticated conversions between one Real-Time Ethernet protocol (2-port) and one fieldbus protocol or one serial automation protocol as well as between two fieldbus protocols as well as between one fieldbus protocol and one serial automation protocol. Licensed Master functionality is unrestricted.

A memory card slot allows the user to save firmware and configuration data on a removable card. In case of problems, the user can continue operation within a few seconds by removing the memory card from the netTAP 100 and connecting it to a spare unit.

Apart from s dard protocols, netTAP 100 supports the programming of special serial protocols with the Lua-based scripting language netSCRIPT. A full-featured development environment (included within the delivery) allows the comfortable and rapid programming of any proprietary serial protocol as well as the I/O data preprocessing and further processing during the conversion into the secondary I/O field protocol.

IEPSOLnical Data – NT 100-CO-CC CANopen to CC-Link Slave:

ProductProduct nameNT 100-CO-CC
Part number1716.140
Brief descriptionGateway CANopen to CC-Link-Slave
Communication controllernetXnetX 100
Integrated MemoryRAM8 MB SDRAM
FLASH4 MB serial Flash
Memory cardType and sizeSD or MMC card, max. 2 GByte
Power supplySupply voltage24 V DC ± 6 V
Maximum Current at 24 V (typically)130 mA
Typical power consumption3,2 W
ConnectorMini-COMBICON, 2-pin
Reverse voltage protectionyes
Requirement to the power supplyFor UL compliant usage: Device shall be supplied by an isolated voltage source
Communication interface X2Communication s dardCANopen
Interface typeISO 11898, optically isolated
ConnectorD-Sub, plug, 9-pin
Communication interface X3Communication s dardCC-Link V2.0 and 1.1
Interface typeRS-485, galvanically isolated
ConnectorCOMBICON, 5-pin
Diagnostic interfaceTypeUSB
ConnectorMini-USB, 5-pin
DisplaysLED displaysSYS System status
APL Application status
CAN Communication status Duo LED red/green
L RUN/L ERR Communication status, green: L RUN, red: L ERR
Operating elementsNetwork addressNetwork address, 2 rotary switches
Permitted ambient conditionsAmbient temperature (operation)0 … + 60 °C
Humidityno condensation permitted
Pollution degreeFor UL-compliant usage: Device must be used in a pollution degree 2 environment
Altitude0 … 2000 m
DeviceDimensions (L x W x H)100 x 52 x 70 mm (without connector)
Weightappr. 150 g
Degree of protectionIP 20
Mountingon DIN rail EN 60715
ConfigurationConfiguration softwareSYCON.net
ConformityRoHSYes
UL certificationULThe device is UL 508 certified
UL fileUL-File No E334100
Conformance with EMC directivesCE signYes
UKCA signYes
EmissionCISPR 11 Class A
ImmunityEN 61131-2 / BS EN 61131-2

Download Datasheet:

SKU: NT 100-CO-CC Categories: , , , , Tags: , Brand:
General Details
Brand

Hilscher

Related products

Brands Carousel

SHOPPING CART

close

Select at least 2 products
to compare