No products in the cart.
Communication & Connectivity, Gateways / Protocol Converters, Communication interfaces, Network Device, Industrial Gateways
NT 100-DN-CO Hilscher
Availability:
Available on backorder
Make: Hilscher | Origin: Germany | Condition: New
Gateway DeviceNet to CANopen | High-end gateway for demanding conversions
✔ Connects DeviceNet and CANopen networks bidirectionally.
✔ Supports up to 63 DeviceNet Slaves or 126 CANopen Nodes.
✔ I/O data conversion in under 10 ms.
✔ Quick device exchange via memory card.
✔ Loadable firmware for flexible conversions.
✔ USB interface for diagnostics and configuration.
€826.00
Available on backorder
NT 100-DN-CO DeviceNet to CANopen supports the following protocols:
- CANopen Slave
- DeviceNet Slave
- DeviceNet Master
- CANopen Master
netTAP 100 connects to communication networks and acts as a Gateway for sophisticated conversions between one Real-Time Ethernet protocol (2-port) and one fieldbus protocol or one serial automation protocol as well as between two fieldbus protocols as well as between one fieldbus protocol and one serial automation protocol. Licensed Master functionality is unrestricted.
A memory card slot allows the user to save firmware and configuration data on a removable card. In case of problems, the user can continue operation within a few seconds by removing the memory card from the netTAP 100 and connecting it to a spare unit.
Apart from s dard protocols, netTAP 100 supports the programming of special serial protocols with the Lua-based scripting language netSCRIPT. A full-featured development environment (included within the delivery) allows the comfortable and rapid programming of any proprietary serial protocol as well as the I/O data preprocessing and further processing during the conversion into the secondary I/O field protocol.
IEPSOLnical Data – NT 100-DN-CO DeviceNet to CANopen:
| Product | Product name | NT 100-DN-CO |
| Part number | 1717.160 | |
| Brief description | Gateway DeviceNet to CANopen | |
| Communication controller | netX | netX 100 |
| Integrated Memory | RAM | 8 MB SDRAM |
| FLASH | 4 MB serial Flash | |
| Memory card | Type and size | SD or MMC card, max. 2 GByte |
| Power supply | Supply voltage | 24 V DC ± 6 V |
| Maximum Current at 24 V (typically) | 130 mA | |
| Typical power consumption | 3,2 W | |
| Connector | Mini-COMBICON, 2-pin | |
| Reverse voltage protection | yes | |
| Requirement to the power supply | For UL compliant usage: Device shall be supplied by an isolated voltage source | |
| Communication interface X2 | Communication s dard | DeviceNet |
| Interface type | ISO 11898, optically isolated | |
| Connector | COMBICON, 5-pin | |
| Communication interface X3 | Communication s dard | CANopen |
| Interface type | ISO 11898, optically isolated | |
| Connector | D-Sub, plug, 9-pin | |
| Diagnostic interface | Type | USB |
| Connector | Mini-USB, 5-pin | |
| Displays | LED displays | SYS System status |
| APL Application status | ||
| MNS Module/ Network Status Duo LED red/green | ||
| CAN Communication status Duo LED red/green | ||
| Operating elements | Network address | Network address, 2 rotary switches |
| Permitted ambient conditions | Ambient temperature (operation) | 0 … + 60 °C |
| Humidity | no condensation permitted | |
| Altitude | 0 … 2000 m | |
| Pollution degree | For UL-compliant usage: Device must be used in a pollution degree 2 environment | |
| Device | Dimensions (L x W x H) | 100 x 52 x 70 mm (without connector) |
| Weight | appr. 150 g | |
| Degree of protection | IP 20 | |
| Mounting | on DIN rail EN 60715 | |
| Configuration | Configuration software | SYCON.net |
| Conformity | RoHS | Yes |
| UL certification | UL | The device is UL 508 certified |
| UL file | UL-File No E334100 | |
| Conformance with EMC directives | CE sign | Yes |
| UKCA sign | Yes | |
| Emission | CISPR 11 Class A | |
| Immunity | EN 61131-2 / BS EN 61131-2 | |
| Electrostatic discharge (ESD) according to EN 61000-4-2 / BS EN 61000-4-2 (Air discharge method) | ±8 kV Criterion B | |
| Electrostatic discharge (ESD) according to EN 61000-4-2 / BS EN 61000-4-2 (Contact discharge method) | ±4 kV Criterion A | |
| Fast transient interferences (Burst), according to EN 61000-4-4 / BS EN 61000-4-4 | ±2 kV Criterion B | |
| Surge voltage, according to EN 61000-4-5 / BS EN 61000-4-5 (Communication and data lines) | ±1 kV Criterion B |
Download Datasheet:
General Details
| Brand | Hilscher |
|---|
Related products
- Communication & Connectivity, Gateways / Protocol Converters, Communication interfaces, Network Device, Industrial Gateways
NT 100-RE-CC Hilscher
Communication & Connectivity, Gateways / Protocol Converters, Communication interfaces, Network Device, Industrial GatewaysNT 100-RE-CC Hilscher
Make: Hilscher | Origin: Germany | Condition: New
Gateway Real-Time Ethernet to CC-Link Slave | High-end gateway for demanding conversions
✔ Integrates Real-Time Ethernet in CC-Link.
✔ Supports multiple protocols and devices.
✔ I/O conversion under 10 ms.
✔ Quick swap via memory card.
✔ Flexible with loadable firmware.
✔ USB for diagnostics.SKU: NT 100-RE-CC - Communication & Connectivity, Gateways / Protocol Converters, Communication interfaces, Network Device, Industrial Gateways
NT 151-RE-RE Hilscher
Communication & Connectivity, Gateways / Protocol Converters, Communication interfaces, Network Device, Industrial GatewaysNT 151-RE-RE Hilscher
Make: Hilscher | Origin: Germany | Condition: New
Gateway Industrial Ethernet to Industrial Ethernet | Data transmission between two Real-Time Ethernet networks✔ Supports multiple protocols
✔ Converts Master/Slave or Slave/Slave
✔ Connects and integrates networks
✔ Ensures secure separation
✔ Quick swap via memory card
✔ USB for diagnosticsSKU: NT 151-RE-RE - Communication & Connectivity, Gateways / Protocol Converters, Communication interfaces, Network Device, Industrial Gateways
NT 50-CC-RS Hilscher
Communication & Connectivity, Gateways / Protocol Converters, Communication interfaces, Network Device, Industrial GatewaysNT 50-CC-RS Hilscher
Make: Hilscher | Origin: Germany | Condition: NewGateway CC-Link Slave to Modbus RTU | Cost-optimized entry level Gateway for simple conversions✔ Integrates Modbus RTU devices into a CC-Link network
✔ Flexible use of Modbus RTU as Master or Slave
✔ Extremely space-saving compact design
✔ Loadable Firmware for flexible use of other conversions
✔ With Ethernet diagnostic and configuration portSKU: n/a - Communication & Connectivity, Gateways / Protocol Converters, Communication interfaces, Network Device, Industrial Gateways
NT 50-CO-EN Hilscher
Communication & Connectivity, Gateways / Protocol Converters, Communication interfaces, Network Device, Industrial GatewaysNT 50-CO-EN Hilscher
Make: Hilscher | Origin: Germany | Condition: New
Gateway CANopen to Ethernet | Cost-optimized entry level gateway for simple conversions
✔ Connects CANopen and Ethernet
✔ Customizable I/O mapping
✔ I/O conversion under 20 ms
✔ Compact design
✔ Flexible with loadable firmware
✔ Ethernet for diagnosticsSKU: NT 50-CO-EN
