Dark Light
NT 100-DP-CC Hilscher
, , , ,

NT 100-DP-CC Hilscher

Availability:

Available on backorder

Add to Wishlist
Compare
Make: Hilscher | Origin: Germany | Condition: New
Gateway PROFIBUS DP Master to CC-Link Slave | High-End Gateway for demanding conversions
  • Integrates a subordinate PROFIBUS network trunk in CC-Link
  • Master for up to 125 PROFIBUS slaves
  • Shortest I/O data conversion time lower than 10 ms
  • Device replacement in seconds via memory card based loading
  • Loadable firmware for flexible use of other conversions
  • With USB diagnostic and configuration port

Request Quote

netTAP 100 is the protocol converter for sophisticated conversions and supports 2-port Real-Time Ethernet to serial, Fieldbus to Fieldbus, Real-Time Ethernet to Fieldbus and Real-Time Ethernet to Ethernet conversions. It supports slave and master functionality in any combination. Master functionality is unrestricted when licensed.

A memory card slot allows the user to save firmware and configuration data on a removable card. In case of failure all that is necessary to bring the plant back on line within seconds is to move the memory card from the old netTAP 100 onto a spare unit.

Apart from s dard protocols, netTAP 100 supports the creation of serial protocols with the Lua-based scripting language netSCRIPT. A full featured development environment is included within the delivery. It allows the comfortable and rapid programming of any proprietary serial protocol as well as the I/O data pre-processing during the conversion into the other field protocol.

Ordering information:

Product namePart numberBrief description
NT 100-DP-CC1718.140Gateway PROFIBUS DP Master to CC-Link Slave
NXLIC-MASTER8211.000Master license

NT 100-DP-CC HilscherNT 100-DP-CC Hilscher

Categories: , , , , Brand:
Other
Weight0.5 kg
Dimensions25 × 15 × 17 cm
ProductProduct nameNT 100-DP-CC
Part number1718.140
Brief descriptionGateway PROFIBUS DP to CC-Link-Slave
Communication controllernetXnetX 100
Integrated MemoryRAM8 MB SDRAM
FLASH4 MB serial Flash
Memory cardType and sizeSD or MMC card, max. 2 GByte
Power supplySupply voltage24 V DC ± 6 V
Maximum Current at 24 V (typically)130 mA
Typical power consumption3,2 W
ConnectorMini-COMBICON, 2-pin
Reverse voltage protectionyes
Requirement to the power supplyFor UL conform usage: Device shall be supplied by an isolated voltage source
Communication interface 1Communication s dardPROFIBUS-DP
Interface typeRS-485, optically isolated
ConnectorD-Sub, female, 9-pin
Communication interface 2Communication s dardCC-Link V2.0 and 1.1
Interface typeRS-485
ConnectorCOMBICON, 5-pin
Diagnostic interfaceTypeUSB
ConnectorMini-USB, 5-pin
DisplaysLED displaysSYS System status
APL Application status
COM Communication status
LINK Link, ACT Activity
Operating elementsNetwork addressNetwork address, 2 rotary switches
Permitted ambient conditionsAmbient temperature (operation)0 … + 60 °C
Humidityno condensation permitted
Pollution degreeFor UL-compliant usage: Device must be used in a pollution degree 2 environment
DeviceDimensions (L x W x H)100 x 52 x 70 mm (without connector)
Weightappr. 150 g
Degree of protectionIP 20
Mountingon DIN rail EN 60715
ConformityRoHSYes
UL certificationULThe device is UL 508 certified
UL fileUL-File No E334100
Conformance with EMC directivesCE signYes
EmissionCISPR 11 Class A
ImmunityEN 61131-2:2003

Related products

Brands Carousel

SHOPPING CART

close

Select at least 2 products
to compare