No products in the cart.
Communication & Connectivity, Gateways / Protocol Converters, Communication interfaces, Network Device, Industrial Gateways
NT 50-CC-RS Hilscher
Availability:
Available on backorder
Make: Hilscher | Origin: Germany | Condition: New
Gateway CC-Link Slave to Modbus RTU | Cost-optimized entry level Gateway for simple conversions
✔ Integrates Modbus RTU devices into a CC-Link network
✔ Flexible use of Modbus RTU as Master or Slave
✔ Extremely space-saving compact design
✔ Loadable Firmware for flexible use of other conversions
✔ With Ethernet diagnostic and configuration port
netTAP 50 is a protocol converter for simple conversions. netTAP 50 converts 1-port Real-Time Ethernet, fieldbus and serial automation protocols. Slave to slave or slave to master conversions are supported. As a master, netTAP 50 provides full master functionality to one slave device only. This makes it easy to integrate a single field device into any higher-level network.
The design impresses with a cost-optimized, compact hardware implementation being reduced to the elementary requirements of a protocol converter. The converter addresses market segments which set the focus on cost savings. The cost-reduced design combined with its countless conversion possibilities makes netTAP 50 an attractive gateway in terms of price and universality.
NT 50-CC-RS1754.100Gateway CC-Link Slave to RS-232/422/485
| Product name | Part number | Brief description |
|---|---|---|
| NT 50-CC-RS | 1754.100 | Gateway CC-Link Slave to RS-232/422/485 |
Other
| Weight | 0.5 kg |
|---|---|
| Dimensions | 25 × 15 × 17 cm |
ProductProduct nameNT 50-CC-RSPart number1754.100Brief descriptionGateway CC-Link Slave to RS-232/422/485Communication controllerCommunication controllernetX 50Integrated MemoryRAM8 MB SDRAMFLASH4 MB serial FlashPower supplySupply voltage24 V ± 6 V DCCurrent consumption at 24 V (typically)72 mAConnector typeMini-COMBICON, 2-pinCommunication interface 1Communication interfaceCC-Link V2.0 and 1.1Interface typeRS-485Connector typeCOMBICON, 5-pinCommunication interface 2Communication interfaceSerial interfaceInterface typeRS-232, RS-422, RS-485Connector typeRJ45, Ethernet and serial interface together in one connectorDiagnostic interfaceTypeEthernet, 4-pinConnector typeRJ45 socketDisplayDisplay 1SYS System statusDisplay 2APL Application statusDisplay 3COM Communication statusDisplay 4LINK Link, ACT ActivityPermitted ambient conditionsAmbient temperature (operation)0 … +60 °CRelative humidity (operation)no condensation allowedDeviceDimensions (L x W x H)100 x 26 x 66 mm (without connector)Weightappr. 80 gDegree of protectionIP 20Mounting typeon DIN rail EN 60715ConfigurationConfiguration softwareSYCON.netConformityRoHSYesConformance with EMC directivesCE signYesEmissionCISPR 11 Class AImmunityEN 61131-2:2003
Related products
- Communication & Connectivity, Gateways / Protocol Converters, Communication interfaces, Network Device, Industrial Gateways
NT 100-RE-EN Hilscher
Communication & Connectivity, Gateways / Protocol Converters, Communication interfaces, Network Device, Industrial GatewaysNT 100-RE-EN Hilscher
Make: Hilscher | Origin: Germany | Condition: New
Gateway Real-Time Ethernet to Ethernet | High-end gateway for demanding conversions✔ Integrates a subordinate Real-Time Ethernet network into another Ethernet system, and vice versa
✔ Master for up to 200 EtherCAT Slaves, 128 PROFINET IO-Devices, 64 EtherNet/IP Adapter, 511 Sercos Slaves
✔ Shortest I/O data conversion period of less than 10 ms
✔ Device exchange in seconds by loading via memory card
✔ Loadable firmware for the flexible use of further conversions
✔ With diagnosis and configuration interface via USBSKU: NT 100-RE-EN - Communication & Connectivity, Gateways / Protocol Converters, Communication interfaces, Network Device, Industrial Gateways
NT 100-RE-CC Hilscher
Communication & Connectivity, Gateways / Protocol Converters, Communication interfaces, Network Device, Industrial GatewaysNT 100-RE-CC Hilscher
Make: Hilscher | Origin: Germany | Condition: New
Gateway Real-Time Ethernet to CC-Link Slave | High-end gateway for demanding conversions
✔ Integrates Real-Time Ethernet in CC-Link.
✔ Supports multiple protocols and devices.
✔ I/O conversion under 10 ms.
✔ Quick swap via memory card.
✔ Flexible with loadable firmware.
✔ USB for diagnostics.SKU: NT 100-RE-CC - Communication & Connectivity, Gateways / Protocol Converters, Communication interfaces, Network Device, Industrial Gateways
NT 100-DP-CO Hilscher
Communication & Connectivity, Gateways / Protocol Converters, Communication interfaces, Network Device, Industrial GatewaysNT 100-DP-CO Hilscher
Make: Hilscher | Origin: Germany | Condition: NewGateway CANopen Master to PROFIBUS DP Slave | High-End Gateway for demanding conversions- Integrates a subordinate CANopen network trunk in PROFIBUS
- Master for up to 126 CANopen nodes
- Shortest I/O data conversion time lower than 10 ms
- Device replacement in seconds via memory card based loading
- Loadable firmware for flexible use of other conversions
- With USB diagnostic and configuration port
SKU: n/a - Communication & Connectivity, Gateways / Protocol Converters, Communication interfaces, Network Device, Industrial Gateways
NT 50-MPI Hilscher
Communication & Connectivity, Gateways / Protocol Converters, Communication interfaces, Network Device, Industrial GatewaysNT 50-MPI Hilscher
Make: Hilscher | Origin: Germany | Condition: New
S7-200/300/400 Ethernet programming adapter | S7-SPS remote maintenance, programming, and visualization via Ethernet
✔ Connects via any free PROFIBUS/MPI/PPI port.
✔ Cost-effective alternative to S7 Ethernet CPs.
✔ Auto driver integration into S7 tools.
✔ Easy PLC-to-PLC coupling without Ethernet.
✔ Quick HMI integration via Ethernet.
✔ Simple access with custom apps (C++, C#).SKU: NT 50-MPI
