No products in the cart.
Head Mounted Temperature Transmitters, Temperature Converters, RTD Converters, Thermocouple Converters, Pt100 Converters, Temperature Transmitters, Temperature & Humidity, Signal Conditioners
PR 5331A Temperature Transmitter
Availability:
In stock (can be backordered)
2-wire programmable transmitter
Model: 5331A3B
Make: PR Electronics
Origin: Denmark
- Version: 5331A3B
- RTD, TC, Ohm, or mV input
- Extremely high measurement accuracy
- 1.5 kVAC galvanic isolation
- Programmable sensor error value
- For DIN form B sensor head mounting
€253.00
In stock (can be backordered)
Application
- Linearized temperature measurement with Pt100…Pt1000, Ni100…Ni1000, or TC sensor.
- Conversion of linear resis ce variation to a s dard analog current signal, for ins ce from valves or Ohmic level sensors.
- Amplification of a bipolar mV signal to a s dard 4…20 mA current signal.
IEPSOLnical characteristics
- Within a few seconds the user can program PR5331A to measure temperatures within all ranges defined by the norms.
- The RTD and resis ce inputs have cable compensation for 2-, 3- and 4-wire connection.
- Continuous check of vital stored data for safety reasons.
Mounting / installation
- For DIN form B sensor head or DIN rail mounting with the PR fitting type 8421.
Other
| Weight | 0.5 kg |
|---|---|
| Dimensions | 25 × 15 × 15 cm |
Environmental Conditions
| Operating temperature | -40°C to +85°C |
| Calibration temperature | 20…28°C |
| Relative humidity | < 95% RH (non-cond.) |
| Protection degree (encl./terminal) | IP68 / IP00 |
Mechanical specifications
| Dimensions | Ø 44 x 20.2 mm |
| Weight approx. | 50 g |
| Wire size | 1 x 1.5 mm2 stranded wire |
| Screw terminal torque | 0.4 Nm |
| Vibration | IEC 60068-2-6 |
| 2…25 Hz | ±1.6 mm |
| 25…100 Hz | ±4 g |
Common specifications
Supply | |
| Supply voltage | 8.0…35 VDC |
| Internal power dissipation | 25 mW…0.8 W |
Response time | |
| Response time (programmable) | 0.33…60 s |
| Voltage drop | 8.0 VDC |
| Warm-up time | 5 min. |
| Programming | Loop Link |
| Signal / noise ratio | Min. 60 dB |
| Accuracy | Better than 0.1% of selected range |
| Signal dynamics, input | 19 bit |
| Signal dynamics, output | 16 bit |
| Effect of supply voltage change | < 0.005% of span / VDC |
| EMC immunity influence | < ±0.5% of span |
Input specifications
Common input specifications | |
| Max. offset | 50% of selected max. value |
RTD input | |
| RTD type | Pt100, Ni100, lin. R |
| Cable resis ce per wire (max.) | 10 Ω |
| Sensor current | > 0.2 mA, < 0.4 mA |
| Effect of sensor cable resis ce (3-wire) | < 0.002 Ω / Ω |
| Sensor error detection | Yes |
Linear resis ce input | |
| Linear resis ce min….max. | 0 Ω…10000 Ω |
Output specifications
Current output | |
| Signal range | 4…20 mA |
| Min. signal range | 16 mA |
| Load (@ current output) | ≤ (Vsupply – 8) / 0.023 [Ω] |
| Load stability | ≤ 0.01% of span / 100 Ω |
| Sensor error indication | Programmable 3.5…23 mA |
| NAMUR NE 43 Upscale/Downscale | 23 mA / 3.5 mA |
Common output specifications | |
| Updating time | 135 ms |
| *of span | = of the presently selected range |
Observed authority requirements
| EMC | 2014/30/EU |
Approvals
| ATEX 2014/34/EU | KEMA 10ATEX0003 X |
| IECEx | DEK 13.0036X |
| INMETRO | DEKRA 13.0002 X |
| CCOE | P337392/3 |
| EAC | TR-CU 020/2011 |
| DNV-GL Marine | S d. f. Certific. No. 2.4 |
Data sheet
Manuals
You may also like…
- Signal Conditioners, Head Mounted Temperature Transmitters
PR 5337A HART Temperature Transmitter
Make: PR Electronics | Origin: Denmark | Condition: New
✔ Supports RTD, TC, Ohm, and bipolar mV input signals
✔ Features 2 analog inputs and up to 5 device variables with status indication
✔ Selectable HART communication protocol: HART 5 or HART 7
✔ Hardware evaluated for use in SIL-rated safety applications
✔ Suitable for installation in Safe Area or Zone 2/22 environmentsSKU: n/a
Related products
- Signal Conditioners
PR 3101 Thermocouple Converter
Make: PR Electronics | Origin: Denmark | Condition: New
✔ Superior precision with accuracy exceeding 0.1% of full scale
✔ Outstanding electromagnetic compatibility (EMC) and effective suppression of 50/60 Hz interference
✔ Choice of fast or standard response times: under 30 ms or 300 ms
✔ Factory-set temperature ranges adjustable through DIP switch selection
✔ Compact 6.1 mm slim-profile enclosureSKU: n/a - RTD Converters, Temperature Transmitters, Head Mounted Temperature Transmitters, Signal Conditioners
PR 5333D Temperature Transmitter
RTD Converters, Temperature Transmitters, Head Mounted Temperature Transmitters, Signal ConditionersPR 5333D Temperature Transmitter
PR 5333D Temperature Transmitter / Ex RTD Temperature Transmitter
Make: PR Electronics | Origin: Denmark | Condition: New✔ 2-wire loop-powered transmitter
✔ Supports RTD or Ohm input
✔ High accuracy and long-term stability
✔ Ideal for process and industrial controlPR 5333D ex RTD Temperature Transmitter / Pt100…Pt1000 or Ni100…Ni1000 Temperature Sensor converter
SKU: PR 5333D - Signal Conditioners, Signal Isolators & Repeaters, Current/Voltage Converters, Universal Converters
PR 3114 Isolated Universal Converter
Signal Conditioners, Signal Isolators & Repeaters, Current/Voltage Converters, Universal ConvertersPR 3114 Isolated Universal Converter
PR Electronics 3114 – Isolated universal converterPart: PR3114
Make: PR Electronics
Origin: Denmark- Input for RTD, TC, Ohm, potentiometer, mA and V
- Slimline housing of 6 mm
- 2-wire supply >15 V
- Output for current and voltage
- Can be supplied separately or installed on the power rail, PR 9400
SKU: PR 3114
