No products in the cart.
HART Temperature Transmitters, RTD Converters, Thermocouple Converters, Pt100 Converters, Universal Temperature Transmitters, Temperature Converters, Temperature Transmitters, Temperature & Humidity, Head Mounted Temperature Transmitters, Signal Conditioners
PR 5335A HART Temperature Transmitter
Availability:
In stock (can be backordered)
Make: PR Electronics | Origin: Denmark | Condition: New
€395.00
In stock (can be backordered)
Application
- Linearized temperature measurement with Pt100…Pt1000, Ni100…Ni1000, or TC sensor.
- Difference or average temperature measurement of 2 resis ce or TC sensors.
- Conversion of linear resis ce variation to a s dard analog current signal, for ins ce from valves or Ohmic level sensors.
- Amplification of a bipolar mV signal to a s dard 4…20 mA current signal.
- Connection of up to 15 transmitters to a digital 2-wire signal with HART communication.
IEPSOLnical characteristics
- Within a few seconds the user can program PR5335A to measure temperatures within all ranges defined by the norms.
- The RTD and resis ce inputs have cable compensation for 2-, 3- and 4-wire connection.
- The PR5335A has been designed according to strict safety requirements and is therefore suitable for application in SIL 2 installations.
- Continuous check of vital stored data for safety reasons.
- Sensor error detection according to the guidelines in NAMUR NE89.
Mounting / installation
- For DIN form B sensor head or DIN rail mounting with the PR fitting type 8421.
General Details
| Brand | PR Electronics |
|---|---|
| Country of Origin | Denmark |
| Warranty | 5 Years |
Technical Details
| Function | Temperature Transmitter |
|---|---|
| Input(s) | Universal |
| Output(s) | 4….20mA + HART |
| Power Supply | Loop Powered |
| Number of Inputs | 1 |
| Communications | HART |
| Mounting Type | Head-Mounted |
| Dimension | Ø44×20.2 mm |
| Advanced Features | Calibration, NAMUR NE43 Upscale/Downscale, Password Protection, Polynomial |
| Brand | PR Electronics |
| Country of Origin | Denmark |
| Warranty | 5 Years |
Other
| Weight | 0.5 kg |
|---|---|
| Dimensions | 25 × 15 × 15 cm |
Environmental Conditions
| Operating temperature | -40°C to +85°C |
| Calibration temperature | 20…28°C |
| Relative humidity | < 95% RH (non-cond.) |
| Protection degree (encl./terminal) | IP68 / IP00 |
Mechanical specifications
| Dimensions | Ø 44 x 20.2 mm |
| Weight approx. | 50 g |
| Wire size | 1 x 1.5 mm2 stranded wire |
| Screw terminal torque | 0.4 Nm |
| Vibration | IEC 60068-2-6 |
| 2…25 Hz | ±1.6 mm |
| 25…100 Hz | ±4 g |
Common specifications
Supply | |
| Supply voltage | 8.0…35 VDC |
Isolation voltage | |
| Isolation voltage, test / working | 1.5 kVAC / 50 VAC |
Response time | |
| Response time (programmable) | 1…60 s |
| Warm-up time | 30 s |
| Programming | Loop Link & HART |
| Signal / noise ratio | Min. 60 dB |
| Accuracy | Better than 0.05% of selected range |
| Signal dynamics, input | 22 bit |
| Signal dynamics, output | 16 bit |
| Effect of supply voltage change | < 0.005% of span / VDC |
| EMC immunity influence | < ±0.1% of span |
| Extended EMC immunity: NAMUR NE21, A criterion, burst | < ±1% of span |
Input specifications
Common input specifications | |
| Max. offset | 50% of selected max. value |
RTD input | |
| RTD type | Pt100, Ni100, lin. R |
| Cable resis ce per wire (max.) | 5 Ω (up to 50 Ω per wire is possible with reduced measurement accuracy) |
| Sensor current | Nom. 0.2 mA |
| Effect of sensor cable resis ce (3-/4-wire) | < 0.002 Ω / Ω |
| Sensor error detection | Yes |
TC input | |
| Thermocouple type | B, E, J, K, L, N, R, S, T, U, W3, W5 |
| Cold junction compensation (CJC) | < ±1.0°C |
| Sensor error detection | Yes |
| Sensor error current: When detecting / else | Nom. 33 μA / 0 μA |
Voltage input | |
| Measurement range | -800…+800 mV |
| Min. measurement range (span) | 2.5 mV |
| Input resis ce | 10 MΩ |
Output specifications
Current output | |
| Signal range | 4…20 mA |
| Min. signal range | 16 mA |
| Load (@ current output) | ≤ (Vsupply – 8) / 0.023 [Ω] |
| Load stability | ≤ 0.01% of span / 100 Ω |
| Sensor error indication | Programmable 3.5…23 mA |
| NAMUR NE43 Upscale/Downscale | 23 mA / 3.5 mA |
| *of span | = of the presently selected range |
Observed authority requirements
| EMC | 2014/30/EU |
| EAC | TR-CU 020/2011 |
Approvals
| ATEX 2014/34/EU | KEMA 03ATEX1508 X |
| IECEx | KEM 10.0083X |
| INMETRO | NCC 12.0844 X |
| DNV-GL Marine | S d. f. Certific. No. 2.4 |
| SIL | Hardware assessed for use in SIL applications |
Data sheet
Manuals
Related products
- RTD Converters, Temperature Transmitters, Head Mounted Temperature Transmitters, Signal Conditioners
PR 5333D Temperature Transmitter
RTD Converters, Temperature Transmitters, Head Mounted Temperature Transmitters, Signal ConditionersPR 5333D Temperature Transmitter
PR 5333D Temperature Transmitter / Ex RTD Temperature Transmitter
Make: PR Electronics | Origin: Denmark | Condition: New✔ 2-wire loop-powered transmitter
✔ Supports RTD or Ohm input
✔ High accuracy and long-term stability
✔ Ideal for process and industrial controlPR 5333D ex RTD Temperature Transmitter / Pt100…Pt1000 or Ni100…Ni1000 Temperature Sensor converter
SKU: PR 5333D - Signal Conditioners, Special
PR 2261 mV Transmitter
Make: PR Electronics | Origin: Denmark | Condition: New
✔ Load cell signal amplification
✔ Conversion from millivolt to current or voltage signals
✔ Front-panel programmable with LED display
✔ Relative input span calibration capability
✔ NPN/PNP input support for external taring
✔ Power supply compatible with standard transducersSKU: n/a - Signal Conditioners
PR 3101 Thermocouple Converter
Make: PR Electronics | Origin: Denmark | Condition: New
✔ Superior precision with accuracy exceeding 0.1% of full scale
✔ Outstanding electromagnetic compatibility (EMC) and effective suppression of 50/60 Hz interference
✔ Choice of fast or standard response times: under 30 ms or 300 ms
✔ Factory-set temperature ranges adjustable through DIP switch selection
✔ Compact 6.1 mm slim-profile enclosureSKU: n/a
