NT 100-DP-DN

Availablity: Available on backorder

Gateway PROFIBUS DP Master to DeviceNet Slave
High-End Gateway for demanding conversions

NT 100-DP-DN

Make: Hilscher
Origin: Germany
Product Status: Active

Integrates a subordinate PROFIBUS network trunk in DeviceNet
Master for up to 125 PROFIBUS slaves
Shortest I/O data conversion time lower than 10 ms
Device replacement in seconds via memory card based loading
Loadable firmware for flexible use of other conversions
With USB diagnostic and configuration port


Available on backorder


netTAP 100 is the protocol converter for sophisticated conversions and supports 2-port Real-Time Ethernet to serial, Fieldbus to Fieldbus, Real-Time Ethernet to Fieldbus and Real-Time Ethernet to Ethernet conversions. It supports slave and master functionality in any combination. Master functionality is unrestricted when licensed.

A memory card slot allows the user to save firmware and configuration data on a removable card. In case of failure all that is necessary to bring the plant back on line within seconds is to move the memory card from the old netTAP 100 onto a spare unit.

Apart from standard protocols, netTAP 100 supports the creation of serial protocols with the Lua-based scripting language netSCRIPT. A full featured development environment is included within the delivery. It allows the comfortable and rapid programming of any proprietary serial protocol as well as the I/O data pre-processing during the conversion into the other field protocol.

Ordering information:

NT 100-DP-DN 1718.170 Gateway PROFIBUS DP Master to DeviceNet Slave
NXLIC-MASTER 8211.000 Master license

Weight 0.5 kg
Dimensions 25 × 15 × 17 mm
Product Product name NT 100-DP-DN
Part number 1718.170
Brief description Gateway PROFIBUS DP to DeviceNet
Communication controller netX netX 100
Integrated Memory RAM 8 MB SDRAM
FLASH 4 MB serial Flash
Memory card Type and size SD or MMC card, max. 2 GByte
Power supply Supply voltage 24 V DC ± 6 V
Maximum Current at 24 V (typically) 130 mA
Typical power consumption 3,2 W
Connector Mini-COMBICON, 2-pin
Reverse voltage protection yes
Requirement to the power supply For UL conform usage: Device shall be supplied by an isolated voltage source
Communication interface 1 Communication standard PROFIBUS-DP
Interface type RS-485, optically isolated
Connector D-Sub, female, 9-pin
Communication interface 2 Communication standard DeviceNet
Interface type ISO 11898, optically isolated
Connector COMBICON, 5-pin
Diagnostic interface Type USB
Connector Mini-USB, 5-pin
Displays LED displays SYS System status
APL Application status
COM Communication status
LINK Link, ACT Activity
Operating elements Network address Network address, 2 rotary switches
Permitted ambient conditions Ambient temperature (operation) 0 … + 60 °C
Humidity no condensation permitted
Pollution degree For UL-compliant usage: Device must be used in a pollution degree 2 environment
Device Dimensions (L x W x H) 100 x 52 x 70 mm (without connector)
Weight appr. 150 g
Degree of protection IP 20
Mounting on DIN rail EN 60715
Conformity RoHS Yes
UL certification UL The device is UL 508 certified
UL file UL-File No E334100
Conformance with EMC directives CE sign Yes
Emission CISPR 11 Class A
Immunity EN 61131-2:2003